We sell, install and service Brivis. In this article we are going to explore some of the Brivis Evaporative Cooling range.  

The Contour Series

The sleek Brivis Contour™ is one of the most advanced Evaporative Coolers in its class, by delivering volumes of refreshing cool air without the large profile of traditional coolers. Designed to consistently deliver clean air, the system’s pre-wet cycle allows for fresh water to enter the cooler and begin soaking the cooling pads before the fan starts. This in addition to other features including robust UV protected plastic construction, quiet operation and efficient water management provides you with peace of mind and comfort all summer long.

Features & Performances

• Ideal for new homes & replacing evaporative air coolers
• Range of popular colours to blend with your roofline
• UV protected plastic casing
• High efficiency with up to 130 mm thick evaporative cooling pads

Every stage of its operation has been designed to make it reliable and discreet. When you turn your cooler on, the Brivis Contour begins its Pre-Wet cycle. Clean fresh water enters the cooler and begins soaking the cooling pads before the fan starts, ensuring that you will only be provided with cool fresh air. It is packed with features to give you comfort and flexibility.

Exclusive to Brivis, our leading edge AquaSave technology saves you up to 45% on water consumption when compared to conventional bleed systems. The AquaSave cleans the water used in the cooling process avoiding any unnecessary wastage.

The Brivis Contour also has one of the smallest water reservoirs on the market, holding up to a third the amount of water than other coolers, minimizing the amount of water discharged when the cooler is turned off.

You can learn more here. 

The Promina Series

The Brivis Promina™ incorporates functional technology including an AutoRefresh water management system which controls the amount of fresh water added to the unit. Once a pre-determined number of fill cycles have been completed, the cooler will automatically flush the entire tank and refill it with clean, fresh water. When cooling is no longer required, the system will automatically run the FreshStart operation removing stagnant water and sediment before starting up again.

Features & Performances

• Low profile sloping base
• WinterSeal available to prevent heat escaping in winter
• Super quiet axial fan
• Available in three colours: Charcoal, Terra Red & Beige

In the Brivis Promina, the AutoRefresh water management system controls the amount of fresh water added to the system. Once a pre-determined number of fill cycles have been completed the cooler will automatically flush the entire tank and refill it with clean, fresh water. While the water is being refreshed the cooler continues to operate, unlike coolers that use a continuous bleed or dump and fill cycle to refresh the tank water. When cooling is no longer required the Brivis Promina will automatically run the FreshStart operation which means there is no stagnant water or sediment sitting in the cooler before it starts up again – reducing the need for seasonal maintenance.

You can learn more here. 

The Advance Series

Contemporary in design, the Brivis Advance™/Brivis Advance Plus Series features a sloping trough which keeps the water constantly circulating through the system.

Its greater cooling pad surface area, excels in providing large cool airflow requirements within the home. This combined with variable fan speed settings, makes the Advance Series the ultimate in providing comfort suited to your needs. Encased in a tough plastic exterior, the Evaporative Cooler has efficient water management, quiet drive fan and a high capacity to keep you cool and comfortable when you need it most.

Features and Performances

• High efficiency cooling pads
• WinterSeal available to prevent heat escaping in winter
• Advance Plus models available with a ServoSeal (Motorised winterseal)
• Available in three colours: Charcoal, Terra Red and Beige

You can learn more here. 

AD BAL Series

Designed to resist the harshest of nature’s challenges, the Brivis AD cooler can be installed in bush fire prone areas. The Brivis ‘Full Metal Jacket’ AD BAL has metal structural support with Stainless Steel ember protection, specifically engineered to meet Australian Standard Bushfire Attack Level 12.5 (AS1530).

If you intend to build, renovate or repair a home in an area with high bushfire risk, you will need to take this Australian Standard into account. Your builder, designer or architect will advise you on how best to achieve this.

The Brivis AD cooler also features sloping trough which keeps the water moving towards the pump and constantly circulating through the system, keeping it fresh and clean. Its variable fan speeds allow the cooler to run slowly when all you want is a gentle breeze.

Features and Performances

• Bushfire Attack Level (BAL) 29 compliant
• Drain valve on all models
• WinterSeal available to prevent heat escaping in winter
• AD66 only available in three colours: Charcoal, Terra Red & Beige

The Brivis AD cooler has a sloping trough which keeps the water moving towards the pump and constantly circulating through the system, keeping it fresh and clean. It has a variable speed fan allowing the cooler to run slowly when all you want is a gentle breeze to keep you cool. If you are located in a high risk bushfire area and you want the ultimate in protection, the Brivis ‘Full Metal Jacket’ AD BAL has metal structural support with Stainless Steel Ember protection, specifically engineered to meet Australian Standard Bushfire Attack Level 29 (AS3959). If you intend to build, renovate or repair a home in an area with high bushfire risk, you will need to take the Standard into account. Your builder, designer or architect will advise you on how best to achieve this.

You can learn more here. 

If you would like to know more about the Brivis range, or about any other brand of air conditioner, please call our friendly team today. We are here to help.